RWP Panel Test Data
|
Test |
Purpose |
Procedure |
Results |
|
Thermal Resistance |
Determines insulating properties of the panels |
ASTM C 236 Guarded Hot Box |
Good R values for an HCFC Foam
System |
|
Strength |
Determines the load/span properties of the roof and wall panels |
ASTM E 72 Chamber Method |
Panel load/span and deflection tables are available |
|
Wind Uplift |
Determines uplift resistance of roof panels in high winds |
Factory Mutual STD. 4471(1995) |
RWP Roof Panels have a class 1-60 rating with a 5' 0" purlin spacing |
|
Ignition Properties |
Determines ignition temperatures of the panel core material |
ASTM D 1929 |
Self-ignition temperature is 860
degrees F. |
|
Surface Burning |
Determines the surface burning characteristics of the core and panels |
Southwest Research Institute |
Finished Panels |
|
Room Fire Test |
Evaluates the burning of roof and wall panels in a room configuration |
Factory Mutual |
All wall and roof panels are rated Class 1 to 30 ft high, 5 in. max thickness |
|
Roof Deck Fire Test |
Evaluates the burning of roof deck panels from internal fire |
Underwriters Laboratories
|
The RWP Roof Panel satisfactorily meets the acceptance requirements |
|
Roof Covering Fire Test |
Evaluates the burning of roof covering from external fire |
Factory Mutual STD. 4471 (1995) |
The RWP Roof Panel is rated Class A |
Note: The numerical flame spread rating is not intended to reflect hazards
presented by this or any other material under actual fire conditions.
RWP Panel Thermal Properties
|
Product
Code |
Thickness |
"U"
Factor |
"R"
Factor |
|
RWP 150 |
1
1/2" |
.082 |
12.2 |
|
RWP 200 |
2" |
.064 |
15.6 |
|
RWP 250 |
2
1/2" |
.053 |
18.9 |
|
RWP 300 |
3" |
.045 |
22.3 |
|
RWP 400 |
4" |
.034 |
29.0 |
|
RWP 500 |
5" |
.028 |
35.7 |
Note: Insulation
values determined by tests conducted in accordance with ASTM C 236 at a mean
temperature
of 75
degrees F., winter condition corrected to 15 mph outside and still inside.