Description: A decorative trim or panel system projecting from the face of a wall panel.

Dimensions: 3:12 slope typical on mansards

Gauge: Varies depending on the design loads.

Length: Varies dependent on the building design and appearance requirements.

Finish: Red Oxide Primer for structural members. Face and soffit finishes vary with panel type

Usage: Aesthetic application

Limitations: Soffit elevation must be at least 2' below eave, minimum projection is 1' 6", maximum projection is 6', and maxium height is 9'. Mansard fascia must be 6" higher than the peak on the endwall and 6" higher than the eave on the sidewall.

Features:
- Aesthetically pleasing
- Covers the eave and rake
- Protected overhang

Benefits:
- Economical way to spruce up any building
- Aestheically appealing
- Provides shelter for walkways, door entrances or areas that require open access.